Heat Exchanger Suction Accumulators for Air Conditioner/HVAC

RFW Refrigeration Heat Exchanger Suction Accumulators
In the air-conditioning system, refrigerant pipeline can be divided into two parts of high and low pressure , the temperature of high pressure refrigerant is higher, it needs the condenser to cool, while the low pressure which goes through the evaporator needs liquid separator to separate refrigerant of gas and liquid, while it will take time to raise temperature of liquid refrigerant to evaporate, then turn into gas to enter the compressor, and prevent from fluid compression , ensure long using life of the compressor.
     Function of heat exchange  gas-liquid separator is that the high-pressure and high-temperature refrigerant which needs cool and the low-pressure and low-temperature refrigerant which needs evaporate  , two pipelines are concentrated through one container, and conduct mutually by high and low temperature ,make the refrigerant which needs cool attain low temperature and make the refrigerant which needs heat attain high temperature, after this heat and cool exchange, the efficiency of system will be raised, and achieve the best cooling effect.
Features
   "U" Shape Pipe designed keeps Max refrigerant flow capacity and the least oil blocking
   Entrance of type "U" siphon is in the back of inlet oriented pipe preventing liquid entering into compressor and destroying it.
   Throttle hole is matching well with system capability to ensure the best about the liquid refrigerant that flow into compressor
   Surface corrosion resistant static electrical painting procedure protecting the shell from the rust.
   Maximum working pressure: 3.0Mpa
Designing Function
1,ODF  Suction line(TP2Y2)
2,ODF  Liquid line(TP2Y2)
3,End Cap(ST12)
4,Oriented pipe(Q235)
5,"U" Shape Angle Pipe(Q235)
6,Pipe coil(Q235)
7,Steel Shell(Q235)
8,Throttle hole